Protos 3400 (X)
Universal measuring system with 3 user-selectable slots for measuring, extension, and communication modules. Also ideal for use in hazardous areas. The modular hardware and software concept of the Protos process analysis system allows the free combination of measuring, extension, and communication modules for flexible adaptation to any application.
Stratos MS Transmiter
The digital Stratos MS multiparameter device can be configured to measure pH, ORP, conductivity (conductive/inductive) or oxygen.
- Digital multiparameter transmitter
- Convenient and intuitive user interface
- VariPower 20 to 253 V AC/DC broad-range power supply
- For digital Memosens sensors
Stratos Evo Transmitter
Stratos Evo offers pioneering solutions for analysis of pH, ORP, conductivity (conductive or inductive) and oxygen using 4-wire technology.
- Intuitive operation with color-coded user guidance
- For digital Memosens and analog sensors
- Diagnostic functions for Memosens sensors
- High-performance HighPower broad-range power supply
- Power supply for external 2-wire transmitters (pressure or flow transmitters)
- Digital communication
- PROFIBUS-DP
- HART
Optisys TUR 1060 Turbidity
Optical turbidity measuring system for potable water applications
- 4-wire, 4…20 mA, 2 alarm relays or Modbus via RS485; built-in data logger
- For online bypass installation
- 0…100/1000 NTU/FNU; max. +50°C / +122°F; 7 bar / 101 psi
- 90° scattered infrared light (ISO 7027) or white light (US EPA 180.1)
Optisys Cl 1100
Potentiostatic amperometric disinfectant measuring system for water and wastewater applications
- Completely mounted with MAC 100 analytical transmitter (Output: 3 x 4…20 mA)
- Pre-installed and tested; for bypass lines
- Cl2: 0.03…20 mg/l; ClO2: 0.05…5 mg/l; O3: 0.05…5 mg/l; Max. +50°C / +122°F; 6 bar / 87 psi
- With chlorine sensor, valves, flow cells, optional pH sensor
Optisys Slm 2100
Optical sludge level measuring system for sedimentation profile measurement and continuous tracking of sludge blanket
- Integrated electronics with 2 x 4…20 mA, 3 relays (e.g. for limit switches)
- 3 measurement modes: profile, sludge blanket/ fluff levels, zone tracking; automatic change of modes possible
- 0.1…30 g/l; max. 10 m / 32.8 ft
- Optional automatic flush cleaning unit for low maintenance
Optisys tss 1050 Suspended Solids
Total suspended solids system for hygienic applications
Features
- 4-wire, 4…20 mA, with head-mounted transmitter
- Process connection: G½ for hygienic adapters
- Max.: 500 EBC, 2000 FAU, 5.0 g/l, 0.4% TS; +90°C / +194°F; 10 bar / 145 psi
- Hygienic stainless steel design, CIP/SIP cleanable