Optiswirl 4200 Vortex Flow Meter
Vortex flow meter for utility applications and energy management systems
- For liquids, (wet) gases, saturated and superheated steam (+240°C / +464°F)
- Integrated P+T measurement: direct output of mass, nominal flow, energy, gross/net heat
- Flange: DN15…300 / ½…12″; wafer version: max. DN100 / 4″
- 2-wire, 4…20 mA, HART®, FF, Profibus-PA
DW 183
Mechanical flow controller for clean liquids
Features
- Flow indication without power supply
- Up to 250,000 l/h or 1101 GPM (US)
- Flange: DN65…200 / 3…8″, max. PN16 / ASME Cl 150
- -40…+300°C / -40…+570°F
Combimass® Gas Flow Meter
Under the name COMBIMASS®, numerous products are available. These include various types of gas flow meters and gas analysers. The COMBIMASS® flow meters are available for non-combustible gases (basic, without ATEX), for a large number of industrial gases and gas mixtures (eco, ATEX Zone 0 – 2), special versions for biogas applications (eco-bio+), and gases from wood gasification plants (syngas). Multiple sensor systems for large pipes and rectangular ducts complete the product range (multi).
Model DP490 Paddle Wheel Flowmeters
The BanksiaControls Dualpulse insertion flow transducer is an innovative design combining well proven technology with modern engineering materials to provide a cost effective and simple means of measuring the flow of water and a wide variety of low viscosity liquids.
- All stainless steel construction
- Suits pipes 40~2500mm (1.5~100″)
- Low installed cost
- Simple to install
- Unique head design to extend linear measuring range
- Two independent pulse outputs with high noise immunity (CE compliant)
- High pressure submersible design
- Hot tap option
Turbopulse Series Turbine Flowmeters
Turbopulse turbine flowmeters are precise, reliable and robust units designed for the volumetric flow measurement of clean low viscosity liquids.
- Long life tungsten carbide bearings
- 15 sizes from 15 to 500mm (½ to 20″)
- Wide variety of process connections:
BSP / NTP male to 50mm (2″)
ANSI or DIN flanges
Hygenic tri-clamp - Pressure to 250 bar (3675 psi)
- Standard range of – 50~120°C (-58~250°F)
- High Temperature option to 150°C (300°F)
- +/- 0.5% linearity (10:1 turndown)
PA – Turbine Flowmeter Range
Our PA – Turbine Flow Meters have a unique open bearing design which allows the measured media to flow freely thru the bearings and therefore provides continuous lubrication. This prolongs the life time of the flow meter and allows for free flow of cleaning agents during CIP. This is why we can provide a full 5-year warranty on our whole turbine flow meter series.
Large Capacity Flowmeters
BanksiaControls 3” and 4” large capacity flowmeters are highly competitive meters suited for receipt verification, loading, un-loading & distribution management at petroleum depots, mine sites, marine & aviation facilities. Common transfer applications involve fuels, oils, solvents, alcohols along with the blending of bio & ethanol fuels.
- Low range : 50~2500 litres/min (13~660 USGPM)
- Nominal sizes : 80 & 100mm ( 3” & 4” )
- Linearity : +/-0.2% 15:1 turndown
- Repeatability : +/-0.03% repeatability
- Temperature : – 20~+120ºC (-4~250ºF)
- Materials : aluminum or 316 Stainless Steel
- Pulse outputs : reed switch & NPN open collector
Medium Capacity Flowmeters
BanksiaControls medium capacity flow meters find widespread application in industry to monitor & control liquid flow streams & allow for precise dispensing of small to medium batch runs. They also have extensive application in the distribution of fuels, fuel oils, lubricant, alcohols, solvents & the blending of bio & ethanol fuels.
- Flow range : 1~450 litres/min (0.26~120 USGPM)
- Nominal sizes : 15~50mm ( 1/2”~2” )
- Linearity : +/-0.5% of reading
- Repeatability : +/-0.03% repeatability
- Temperature : – 20~+120ºC (-4~250ºF)
- Materials : 316 stainless or aluminum
- Pulse outputs : reed switch & NPN open collector (standard)
Small Capacity Flowmeters
BanksiaControls small capacity flowmeters provide precise volumetric measurement of small quantities of liquids or low flows found in a broad range of industrial & commercial industries including automotive, aviation, mining, power, chemical, pharmaceutical, food, paint, medical engineering, petroleum & environmental.
GENERAL SPECIFICATIONS
- Flow range : 0.5~550 litres/hr (0.16~145 USGPH)
- Nominal sizes : 4~8mm ( 1/8”~3/8” )
- Linearity : +/-1% of reading
- Repeatability : +/-0.03% repeatability
- Temperature : – 20~+120ºC (-4~250ºF)
- Materials : 316 stainless or aluminum
- Pulse outputs : reed switch & NPN open collector (standard)