Level Transmitter IP68

EasyTREK/EchoTREK Ultrasonic Level Transmitter for Liquids

Ultrasonic Level Transmitter for liquids.

•  2- /4-wire compact and 2-wire integrated level transmitters
•  Non-contact level measurement
• Maximum 25 m (82 ft) measuring range
•  Narrow (5°) beam angle
•  Can be powered from 12 V battery (SP-500)
•  Full temperature compensation
•  IP68 rated integrated (blind) type
•  Plug-in display unit for the compact types
•  HART® (HART® 7 in case of SP-500)
  communication
•  Ex version
•  Handheld compatibility (SP-500)

Nivocap Capacitive Level Transmitter

NIVOCAP 2-wire capacitive level transmitters provide an ideal solution for level measurement in both conductive and non-conductive liquids. The instrument’s probe and reference probe operate as opposing plates of a capacitor. As the tank fills, the air between the capacitor plates is replaced by a medium with greater dielectric constant. This causes  the capacitance to change in direct proportion to the level. The incorporated electronic circuitry then measures the capacitance difference and converts it into an output signal.

• 2-wire compact transmitter
• Rod or cable probes up to 20 m (65 feet)
• er > 1.5
• Fully or partly insulated probes
• 32-point linearization
• High sensitivity
• 4 – 20 mA + HART® communication
• Explosion-proof models

Pilotrek 80 Ghz

• 2-wire 80 GHz (W-band) radar
• Measuring range up to 30 m for liquids
• Accuracy of ±2 mm
• Easy to install due to small antenna diameter
• Plug-in graphic display module
• Horn and plastic encapsulated antennas
• IP67 protection
• User-friendly threshold management
• Ex variant (pending)

Nivotrack Magentorestrictive Level Transmitter

NIVOTRACK magnetostrictive transmitters are an ideal solution for high accuracy measurement of clean fluids. Its high precision
renders the NIVOTRACK suitable for custody transfer measurement of liquids such as fuels, solvents, alcohol derivatives etc.

• 0.1 mm or 1 mm resolution
• Insertion length maximum 15 m
• Rigid or flexible guide tube
• Plastic coated version for chemicals
• 4-20 mA and HART output
• Graphical display
• 99 point linearization table
• Measurement optimalisation
• Volume measurement
• ATEX certified versions
• OIML R85 certification

NIVOFLIP Bypass Liquid Level Indicator

The NIVOFLIP is a bypass level indicator for pressurized vessels up to 3.5 m height containing liquids.

• Clearly visible optical display
• Measuring range: 500-3500 mm
• ±10 mm accuracy
• Max. 40 bar process pressure
• Optional level switches
• Optional magnetostrictive level transmitter
• PED approval

Nivoswitch – For Liquids

• Most liquids with minimum 0.7 kg/dm³ density and maximum 10⁴ mm²/s viscosity
• Chemical industry
• Food and beverage
• Power plants
• Oil industry
• Water industry

Aquacer

Submersible level transmitters with small Capacitive Ceramic sensor.

• Accuracy 0.2% (Option: 0.1%)
• Ceramic Capacitive Sensor
• Diameter 22mm
• Perfect long term stability
• Temperature compensated

Hydrobar S

The Series “2000-Hydrobar” is a complete range of microprocessor based submersible level transmitters for top mounting, with a local display and adjustment by three push buttons.

• Microprocessor Based
• Easy Calibration Without Test
• Pressure By 3 Push Buttons
• Accuracy 0,1%
• 4-20 Ma And Hart ® Protocol
• “all Stainless” Design
• Wide Rangeability
• Local Display
• Adjustable Damping

Series 4000

The series 4000 is a complete line of ‘High-end’ Intelligent pressure and level transmitters with a stainless steel electronics housing. The calibration/programming can easily be done without test pressure by using the Unique One Touch programming button together with the graphic display with backlight.

• Turn Down 20:1
• Graphic Display With
• Bargraph And Backlight
• Display: Pressure
• Temperature And Bargraph
• Active Temperature
• Compensation
• Development According To Sil2
• Various Linearisation Functions
• All Industrial Process Connections
• Option: Hart ® Protocol

Hydrobar

The Hydrobar is a level transmitter with cable or tube extension. Applications include level measurement of water, wastewater, and sludge.

• Strong flush diaphragm
• Perfect long term stability
• Fixed or adjustable range
• Active temperature compensation

Hydrocer

The Hydrocer can be used for level measurement in all kind of fluids, These include water and waste water, pulp, slurry, and chemicals.

• Accuracy 0.2% (Hydrocer ‘I’: 0,1%)
• Capacitive Ceramic Sensor
• Perfect long term stability
• Temperature compensated

Vibra Switch S

The Vibra-Switch “S” is a rugged and compact levelswitch based on a vibrating probe. It can be used to produce a high or low level signal as well as pump control in all fluid types.

• Rugged And Compact
• Short Insert 47 Mm Till Extension Of 3 Meter
• All Stainless Housing
• Principle: Vibrating
• Hygienic Processconnection
• Maintenance Free
• Pnp Output

Optisound 3010 Ultrasonic Level Transmitter

Ultrasonic level transmitter for basic applications

• Continuous, non-contact level measurement of liquids and solids
• Measuring range: 0.25…5 m / 0.82…16.4 ft (liquids), 0.25…2 m / 0.82…6.6 ft (solids)
• -40…+80°C / +176°F; -0.2…2 barg / -2.9…29 psig

Optiwave 3500 Non Contact Radar Flow

Radar (FMCW) level transmitter for liquids with hygienic requirements

• Continuous, non-contact level measurement in small and narrow vessels, small storage tanks and agitated tanks
• 80 GHz radar, flush-mounted Lens antenna
• Measuring range: 0…50 m / 164 ft
• -40…+150°C / +302°F; -1…25 barg / -14.5…362 psig

Optiwave 6500

Radar (FMCW) level transmitter for powders and dusty atmosphere

• Continuous, non-contact level measurement in high and narrow silos, hoppers or containers
• 80 GHz radar, flush-mounted lens antenna
• Measuring range: 0…100 m / 328 ft
• -50…+200°C / -58…+392°F; -1…40 barg / -14.5…580 psig

Optiflex 1100 TDR Radar Level Transmitter

Guided radar (TDR) level transmitter for basic liquid applications

• Continuous level measurement in buffer, storage, collecting or recycling tanks
• Intuitive quick setup procedure
• Measuring range: 0.7…20 m / 2.3…65.5 ft
• -50…+100°C / -58…+212°F; -1…16 barg / -14.5…232 psig

Optiflex 7200 TDR Radar Level Transmitter

Guided radar (TDR) level transmitter for advanced liquid applications

• Continuous level and interface measurement in process or storage tanks, reactors and pressure vessels
• Extensive choice of probes for harsh process conditions
• Measuring range: 0.3…60 m / 1…197 ft
• -50…+250°C / -58…+482°F; -1…100 barg / -14.5…1450 psig

Optiswitch 3100 Vibration Level Switch

Vibration level switch for solid applications

• Point level detection of powders and fine-grained bulk solids
• Probe length: 220 mm / 8.7″
• Density: <8 g/l / <0.49 lb/ft3
• -50…+250°C / -58…+482°F; -1…16 barg / -14.5…232 psig

Tank Slayer

The Level Plus ® Tank Slayer ® liquid level transmitter satisfies the demand for an accurate and robust liquid-level sensor with unsurpassed flexibility to meet most process application conditions.

• 4-in-1 Measurement: Product Level, Interface Level, Temperature, Volume
• No scheduled maintenance or recalibration
• Inherent Accuracy ±1mm
• Integral Display
• Intrinsically Safe
• Explosion Proof
• 200 Point Strap Table

RefineME

The Level Plus RefineME liquid level transmitter satisfies the demand for an accurate and robust liquid-level sensor with unsurpassed flexibility to meet most process application conditions.

• 4-in-1 Measurement: Product Level, Interface Level, Temperature, Volume
• No scheduled maintenance or re-calibration
• Field Repairable
• Inherent Accuracy ±1mm
• 200 Point Strap Table
• API Temperature Corrected Volumes

SoCLEAN

The Level Plus ® SoCLEAN ® liquid level transmitter satisfies the demand for an accurate and robust liquid-level sensor with unsurpassed flexibility to meet most process application conditions.

• 4-in-1 Measurement: Product Level, Interface Level, Temperature, Volume
• No scheduled maintenance or recalibration
• Field Repairable
• Inherent Accuracy ±1 mm
• Intrinsically Safe
• Sanitary Finish Ra 25 μin
  (0.64 μm)
• Electropolished Finish Ra 15 μin
  (0.38 μm)
• Explosion proof

Level Plus Chambered

The Level Plus ® CHAMBERED level transmitter satisfies the demand for an accurate and robust liquid-level sensor with unsurpassed flexibility to meet most process application conditions.

• No scheduled maintenance or recalibration
• Integral display
• Intrinsically safe
• Explosionproof/flameproof

Level Limit

The Level Plus Level Limit liquid level transmitter satisfies the demand for an accurate and robust liquid level transmitter with integral HI level overfill protection. The level transmitter offers the ability to measure the product level, interface level, temperature, and volume.

• 5-IN-1 Measurement
• Integral HI level Digital I/O
• Level Inherent Accuracy +/- 1 mm
• API Temperature Corrected Volumes
• No Scheduled Maintenance or Recalibration
• Hazardous Area Certified