Flow

VA520 / VA550/ VA570 Thermal Dispersion Flow Meters

VA520 / VA550/ VA570 Thermal dispersion flow meters for mass flow measurement of industrial gases

SRZ Helical Flow Meter

Helical flow meters used for processing media with high viscosities.

• High accuracy
• Wide measuring ranges 1:100, 1:400
• Suitable for pressures up to 400 bar
• Largely independent of viscosity, perfect for 30 up to 10⁶ mm²/s
• Low pressure drop compared with other positive displacement meters
• Double pulse rate and reverse-flow detection possible
• Pulsation-free measurement, non-sensitive to pulsating flows
• Ex-protection EExiallCT6 for zone 1
• Resistant to corrosion by advanced materials and bearings
• Low operating noise

HM Series Turbine Flow Meter

Turbine flow meters for the precise measurement of instantaneous flow rates and flow quantities of low-viscosity fluids.

• High resolution
• Fast response time
• Temperature range from -273 up tp +350° C
• High pressure resistance
• Low pressure drop
• Resistant to contamination with solids

ZHM HP Gear Flow Meter

Gear flow meters for high-pressure applications

• Pressures up to 1000 bar
• Short response time
• Large range of viscosity
• Xylan coated screws
• Frequency amplifiers with EExail CT4 or T6 for zone 1

Optiflux 4300 Electromagnetic Flow Meter

Electromagnetic flow meter for advanced process and custody transfer (CT) applications

• High accuracy (±0.2%), certified for custody transfer
• For low conductivity media (>1 μS/cm) and high solid contents (≤70%)
• Flange: DN2.5…3000 / ⅒…120″, max. PN40 / ASME Cl 600
• 3 x 4…20 mA, HART®,Modbus, FF, Profibus-PA/DP, PROFINET

Optiswirl 4200 Vortex Flow Meter

Vortex flow meter for utility applications and energy management systems

• For liquids, (wet) gases, saturated and superheated steam (+240°C / +464°F)
• Integrated P+T measurement: direct output of mass, nominal flow, energy, gross/net heat
• Flange: DN15…300 / ½…12″; wafer version: max. DN100 / 4″
• 2-wire, 4…20 mA, HART®, FF, Profibus-PA

Optimass 2400 Coriolis Mass Flow Meter

Coriolis mass flow meter for highest capacity bulk measurement

• For gases and liquids up to 4,600 t/h; maintains operation over a wide range of gas fractions and complex flow conditions (EGMTM)
• CT: OIML R117, MI-005, MI-002; API and AGA compliant
• Flange: DN100…400 / 4…16″, max. PN160 / ASME Cl 1500
• 3 x 4…20 mA, HART®7, Modbus, FF, Profibus-PA/DP, PROFINET, EtherNet/IP™, Bluetooth®

Optiflux AFE400 Electromagnetic Flow Meter

Electromagnetic flowmeter for utilities and industrial automation.

• Flow measurement of conductive liquids, e.g. coolants, cold/hot water, chemicals, etc.
• Best-in class temperature range, accuracy, pressure drop and flow range
• Ultra-compact design for parallel installation and tight spaces
• 4…20 mA, pulse, frequency, Modbus, IO-Link

Optiflux 1050/1100/1300 Electromagnetic Flow Meters for Conductive Fluids

Electromagnetic flowmeters for basic applications with conductive liquids

• Cost-effective flow measurement of liquids (≥5 μS/cm) up to +120°C / +248°F
• Extra isolation of electronics for use in high humidity areas
• Wafer-style design: DN10…150 / ⅜…6″, max. PN40 / ASME Cl 300
• 4…20 mA, pulse, frequency, status, HART®, Modbus

Optiflux 2050/2100/2300 Electromagnetic Flow Meters for Water Applications

Electromagnetic flowmeter for basic water and wastewater applications.

KATflow 100

The KATflow 100 is a compact clamp-on ultrasonic flow transmitter with a robust and practical design for permanent installation and flow measurement on single pipes.

• Low cost of ownership
• Process outputs including RS 485,
  Modbus RTU and HART* compatible output
• PT100 inputs for heat quantity (thermal energy)
  measurement
• Bi-directional measurement with totaliser function
• Innovative installation wizard for quick and intuitive programming
• Configuration can be changed to suit customer requirements

KATflow 150

The KATflow 150 is the premier product for flexibility and performance, providing the user with a comprehensive specification and a list of configuration options.

• Dual flow monitoring with sum , average ,difference and maximum calculations
• Process output options including current, open-collector, relay
• Current inputs for temperature, pressure and density compensation
• Communication options RS 485, Modbus RTU, Profibus PA and HART* compatible output
• Large data logger and software for sampling and data transfer
• Optional heat quantity (thermal energy)measurement functionality

KATflow 170

For applications where harsh environmental conditions demand a more rugged instrument, the KATflow 170 provides a corrosion-resistant option as part of the fully ATEX-certified package.

• Suitable for installation in hazardous areas
• Dual flow monitoring with sum , average , difference and maximum calculations
• Process output options including current, open-collector, relay
• IP 68 stainless steel sensors as standard
• Communication options RS 485, Modbus RTU, Profuse PA and HART* compatible output
• ATEX-certified PT100 probe for temperature compensation

KATflow 180

Katronic flow meters are well established for liquid flow applications and can now be applied for the non-invasive measurement of gases.

• Suitable for installation in safe and/or hazardous areas
• Shear and Lamb Wave IP 68 stainless steel sensors
• Process output options including current, open-collector, relay
• Communication option Modbus RTU, Modbus TCP/IP
• Inputs for temperature, pressure and gas compressibility factor available
• Web-based data evaluation, instrument setup via wired, wireless or GSM connection

KATflow 200

The KATflow 200 is a fully portable instrument with a power which is belied by its small size. This lightweight flow meter is incredibly easy to use and can be operated one-handed, making it the  ideal tool for use in confined spaces or when working at height.

• Lightweight and tactile for easy-one handed use
• Stainless steel sensors, cable and connectors as standard
• Innovative installation wizard for quick and intuitive programming
• Full instrument diagnostics and scope function
• Large data logger and software for sampling and data transfer

KATflow 210

The KATflow 210 is a portable flowmeter designed for situations which require a reliable flow measurement regardless of the conditions in which it needs to be operated.

• Three different operating modes to maximise battery life
• Process output options including current, open-collector, relay
• Compact housing 260 (h) x 280 (w) x 200 (d) mm
• IP 68 stainless steel sensors, cable and connectors as standard
• Large data logger and software for sampling and data transfer
• Innovative installation wizard for quick and intuitive programming

Model DP490 Paddle Wheel Flowmeters

The BanksiaControls Dualpulse insertion flow transducer is an innovative design combining well proven technology with modern engineering materials to provide a cost effective and simple means of measuring the flow of water and a wide variety of low viscosity liquids.

• All stainless steel construction
• Suits pipes 40~2500mm (1.5~100″)
• Low installed cost
• Simple to install
• Unique head design to extend linear measuring range
• Two independent pulse outputs with high noise immunity (CE compliant)
• High pressure submersible design
• Hot tap option

RT14 Flow Rate Totaliser – Ancillary Devices

Banksia Controls LCD display RT14 is a fully programmable self-powered flow rate totaliser specifically designed for computing and displaying flow rates and totals from flow meters with pulse, sine wave or frequency outputs.

• Self or external powered, 8 digit LCD total, accumulated total and rate
• Robust IP66/67-NEMA4X universal mount glass reinforced nylon enclosure with rubberised buttons and polycarbonate lens
• GRN field and panel mountable housing
• Sealed pulse, 4-20mA (Loop Powered) output, multi point linearisation of flow input or frequency inputs
• Flow alarm for high, low or high/low
• PIN protected programming
• Simple flow chart touch key programming
• Reverse polarity protection
• Non volatile memory, Long battery life
• Flowmeter and pipe mount kits available

Turbopulse Series Turbine Flowmeters

Turbopulse turbine flowmeters are precise, reliable and robust units designed for the volumetric flow measurement of clean low viscosity liquids.

• Long life tungsten carbide bearings
• 15 sizes from 15 to 500mm (½ to 20″)
• Wide variety of process connections:
  BSP / NTP male to 50mm (2″)
  ANSI or DIN flanges
  Hygenic tri-clamp
• Pressure to 250 bar (3675 psi)
• Standard range of – 50~120°C (-58~250°F)
• High Temperature option to 150°C (300°F)
• +/- 0.5% linearity (10:1 turndown)

PA – Turbine Flowmeter Range

Our PA – Turbine Flow Meters have a unique open bearing design which allows the measured media to flow freely thru the bearings and therefore provides continuous lubrication. This prolongs the life time of the flow meter and allows for free flow of cleaning agents during CIP. This is why we can provide a full 5-year warranty on our whole turbine flow meter series.

Large Capacity Flowmeters

BanksiaControls 3” and 4” large capacity flowmeters are highly competitive meters suited for receipt verification, loading, un-loading & distribution management at petroleum depots, mine sites, marine & aviation facilities. Common transfer applications involve fuels, oils, solvents, alcohols along with the blending of bio & ethanol fuels.

• Low range : 50~2500 litres/min (13~660 USGPM)
• Nominal sizes : 80 & 100mm ( 3” & 4” )
• Linearity : +/-0.2% 15:1 turndown
• Repeatability : +/-0.03% repeatability
• Temperature : – 20~+120ºC (-4~250ºF)
• Materials : aluminum or 316 Stainless Steel
• Pulse outputs : reed switch & NPN open collector

Medium Capacity Flowmeters

BanksiaControls medium capacity flow meters find widespread application in industry to monitor & control liquid flow streams & allow for precise dispensing of small to medium batch runs. They also have extensive application in the distribution of fuels, fuel oils, lubricant, alcohols, solvents & the blending of bio & ethanol fuels.

• Flow range : 1~450 litres/min (0.26~120 USGPM)
• Nominal sizes : 15~50mm ( 1/2”~2” )
• Linearity : +/-0.5% of reading
• Repeatability : +/-0.03% repeatability
• Temperature : – 20~+120ºC (-4~250ºF)
• Materials : 316 stainless or aluminum
• Pulse outputs : reed switch & NPN open collector (standard)

P25 Series In line flow switches

The P25 inline flow switch is a rugged versatile all position mounting flow actuated switch.

• Australian Made
• Directly control pump motors
• Choice of 3 different electrical modules (see data sheet)
• Manual override (P25-S Model only)
• 15mm, 20mm & 25mm connection sizes available
• No metal parts in contact with liquids
• 100L/minute flow rating
• Versatile all position mounting
• 18 Bar (260psi) pressure rating
• IP67 Weatherproof housing

CR22 Microwflow In line flow switches

The CR22 microflow switch operates on the displaced piston principle. Process liquid passing upwards through the switch lifts a precision piston.

• Australian Made
• Can detect flows of less than 500 mL per Hour
• Maximum flow rate of 4L per Minute
• Suits tube and pipes from 6mm to 20 mm
• All wetted parts UPVC with VITON® seals
• Compact vertical position mounting
• 18 Bar 260PSI Pressure rating
• Fast response to flow loss
• Easy to install and service
• Simple and reliable
• Weatherproof

F Series Paddle type

The F Series flow switch is a tough but highly sensitive paddle flow switch suitable for a wide range of flow control applications in both hot and cold liquids.

• Australian Made
• 0 to 500V AC 15 Amp S.P.D.T switch (‘H’ models)
• NEW! – Low Voltage option also available (‘RL’ models)
• 316 Stainless or Polypropylene models
• 3/4” & 1” models available with BSP or NPT threads
• Built in Manual Override (‘H’ models only)
• Sleek modular construction
• High pressure 400 Bar 5800 psi models available
• Seal-less magnetic drive
• Weatherproof IP67 housing
• Easily serviceable

FM Series Paddle type

The FM series flow switch is built tough for the most arduous industrial and mining applications.

• Australian Made
• 0 to 500V AC 15 Amp S.P.D.T switch
• 316 Stainless Process Connection
• Super Tough Billet Aluminium Housing
• Manual override built in
• 3/4” & 1” models available with BSP or NPT threads
• 400 Bar (5800 psi) pressure rating
• Seal-less magnetic drive
• Dieselene & High Temperature versions available
• Weatherproof IP67 housing
• Easily serviceable