Level Switches

Nivoswitch – For Liquids

  • Most liquids with minimum 0.7 kg/dm³ density and maximum 10⁴ mm²/s viscosity
  • Chemical industry
  • Food and beverage
  • Power plants
  • Oil industry
  • Water industry

Nivoswitch – For Solids

  • Granules and powders with minimum 0.01 kg/dm³ bulk density
  • Chemical industry
  • Food and beverage
  • Power plants
  • Paper mills
  • Plastic industry

Nivocont R Vibrating Rod Level Switch

  • Granules and powders with min. 0.05 kg/dm³ bulk density
  • Agriculture
  • Construction materials
  • Chemical industry
  • Food and beverage
  • Mining industry
  • Power plants
  • Paper mill
  • Recycling
  • Plastic industry

Nivocap CK Capacitive Level Switch

  • For solids with εr≥1.5 and liquids
  • Agriculture
  • Construction materials
  • Chemical industry
  • Pharmaceutical industry
  • Food and beverage
  • Mining industry
  • Power plants
  • Paper mills
  • Plastic industry

Easytrek – For Liquids

  • 2-wire transmitter
  • Non-contact level metering
  • Narrow 5° beam angle
  • Excellent signal processing via QUEST+ software
  • Temperature compensation
  • Secondary lightning protection
  • 32-point linearization
  • PP, PVDF, PTFE housing and transducers
  • Explosion-proof variants available
  • Level and volume measurement
  • Open-channel flow metering
  • Fail-safe indication
  • For challenging applications such as vapor, fume, mixing blades, and light foam
  • 5 years warranty

Easytrek – For Solids

  • 4-wire transmitter
  • Non-contact level metering
  • Narrow 5° beam angle
  • Excellent signal processing
  • Temperature compensation
  • Secondary lightning protection
  • 32-point linearization
  • PP and aliminum housing transducers with PVC foam
  • Joystick aiming device
  • Explosion-proof variants available
  • Level and volume measurement
  • Fail-safe indication
  • For challenging applications such as long distance measurement and light dust during filling
  • 5 years warranty

Vibra Switch S

The Vibra-Switch “S” is a rugged and compact levelswitch based on a vibrating probe. It can be used to produce a high or low level signal as well as pump control in all fluid types.

  • Rugged And Compact
  • Short Insert 47 Mm Till Extension Of 3 Meter
  • All Stainless Housing
  • Principle: Vibrating
  • Hygienic Processconnection
  • Maintenance Free
  • Pnp Output

KMW

The hygienic level switch KMW is microprocessor based and can be installed in any position in tanks or piping systems. The measuring principle is an electromagnetic wave (100…180MHz).

  • All Stainless steel design
  • EHEDG certified
  • Small and compact
  • CIP / SIP cleanable
  • No moving parts
  • Adjustable sensitivity
  • Fast response time
  • 7 basic adjustments
  • Calibration via dip-switch or PC

UTS

Built on patented acoustic wave technology, the UTS has a level of accuracy and reliability like never seen before. The technology ensures the accuracy of measurement regardless of shape of tank, type of liquid and temperature.

  • Easy installation
  • No moving parts
  • No maintenance
  • Automatic self test
  • No calibration needed
  • Intrinsically safe
  • Adjustable alarm points
  • Non sensitive to foam

FLX

The FLX is an “All Stainless Steel” liquid Levelswitch, with the ability to measure the conductivity between the sensor tip (9) and the reference part (7), or the tank wall, if it is also made from stainless steel.

  • ‘All Stainless’ design
  • Based on conductivity
  • Sanitary process connections
  • Adjustable sensitivity
  • Easy installation
  • Relay or pnp output
  • Maintenance free
  • Exchangeable electronics

Vibra Switch C

The Vibra-Switch “C” is a rugged and compact levelswitch based on a vibrating probe. It can be used to produce a high or low level signal as well as pump control in all fluid types.

  • Rugged And Compact
  • Short Insert 47 Mm Till Extension Of 3 Meter
  • All Stainless Housing
  • Principle: Vibrating
  • Hygienic Processconnection
  • Maintenance Free
  • Pnp Output

Optiswitch 3100 Vibration Level Switch

Vibration level switch for solid applications

  • Point level detection of powders and fine-grained bulk solids
  • Probe length: 220 mm / 8.7″
  • Density: <8 g/l / <0.49 lb/ft3
  • -50…+250°C / -58…+482°F; -1…16 barg / -14.5…232 psig

Optiswitch 3200 Vibration Level Switch

Vibration level switch with cable extension for solid applications

  • Point level detection of solids
  • Probe length: up to 80 m / 262.5 ft
  • Density: <8 g/l / <0.49 lb/ft3
  • -20…+80°C / -4…+176°F; -1…6 barg / -14.5…87 psig

Optiswitch 3300 Vibration Level Switch

Vibration level switch with rigid extension for solid applications

  • Point level detection of solids
  • Probe length: up to 6 m / 20 ft
  • Density: <8 g/l / <0.49 lb/ft3
  • -50…+250°C / -58…+482°F; -1…16 psig / -14.5…232 psig

Optiswitch 4000

Vibration level switch for basic applications

Features

  • Point level detection of liquids
  • Virtually unaffected by the chemical and physical media properties
  • Density: ≥0.5 g/cm3 / 0.018 lb/in3
  • -40…+150°C / +302°F; -1…64 barg / -14.5…925 psig

Optiswitch 5100

Vibration level switch for process applications

Features

  • Point level detection of liquids
  • Large choice of process fittings, housings and electronics
  • Density: ≥0.5 g/cm3 / 0.018 lb/in3
  • -50…+250°C / -58…+482°F; -1…64 barg / -14.5…928 psig

Optiswitch 5150

Vibration level switch for liquids in hygienic applications

Features

  • Point level detection of liquids in the food, beverage and pharmaceutical industry
  • Polished tuning fork to meet hygienic requirements
  • Density: ≥0.5 g/cm3 / 0.018 lb/in3
  • -50…+250°C / -58…+482°F; -1…64 barg / -14.5…925 psig

Q Series Float Switch

The Q Series Float Switch consists of a heavy duty polypropylene float double molded onto a high quality three core cable.

  • Australian made
  • Extra strong polypropylene float
  • S.P.D.T three wire switch
  • No mercury or lead components
  • High quality CPE rubber cable
  • No corrodible metal parts
  • Sealed tamper proof design
  • Highly chemical resistant
  • Wide range of cable lengths available
  • Optional Cable Weight available.

KU Series Float Level Switch

This product is not suitable for Water or Sewerage applications. The KU series level regulator is a compact three-wire switch specifically designed for single point level control in oils.

  • Australian Made
  • Robust double molded construction
  • Polyurethane 3 core cable
  • Polypropylene housing
  • Low switching differential (35mm)
  • All direction tilt action
  • Stable repeatable switching
  • Compact size 75mm diameter
  • Optional cable weight available

K Series Float Level Regulator

The K series heavy duty level regulator is a compact three-wire float switch for highly accurate and repeatable single point level sensing and control applications.

  • Australian made
  • Low differential switching
  • All direction tilting action
  • S.P.D.T 3 wire switching action
  • Polypropylene, CPE and Santoprene construction
  • Wide range of cable lengths available
  • Stable repeatable switching action
  • No Mercury or lead components
  • Compact size, 75mm diameter
  • Optional cable weight available